How to do Everything

How to Tie a Cravat: Tie Cravat, Instructions for Cravats

How to Tie a Cravat. Tie a Cravat is an activity that has a few styles and is necessarily learned by those who begin secondary school in our country. Actually it is not so hard but it does not know who does not use it. Tie a Cravat is a must in business, especially if you are wearing a suit. The team’s ties with the handbag are now almost an entirety. In addition, according to the public personnel law in our country, it is a compulsory basis for wearing a tie.

The Cravat is a 17th century military apparel piece with today’s civilian clothing; in particular an integral part of the suit. In this article, we will give you some information about how to tie the hooks and tie tying techniques.Tie a Cravat is known by the French Cravate, the word. Croats or cravates, that is, Croats, became universal due to the fact that the Croatian soldiers had become accustomed to the name of the accessory. Of course the English jug is not known by the French name, but the Americans and the British know it with the name “Tie”.

How to Tie a Cravat Techniques



It is also known as “Four in hand” with its technical name “simple knot” which is the most classic and most preferred type among tie knots. Since it is one of the most classical methods, a tie with a simple knot system can be applied to all shirt collars.

Ties made with “simple knot” technique, which has a long and conical structure, are widely used in thin fabric products and narrow and thick fabric products.


double knot

How to connect a tie with a double knot technique? You can easily find the answer with picture narration.

The double node method, also known as Victoria, is a tie binding method that is very similar to the simple node technique but requires a second round. In order to connect the tie with the double knot, the tip of the tie must first travel around the narrow end twice.

Ties made with a double knot technique have a thicker look than ties made with a simple knot. If the fabric of the tie is not too thick, the ties made with the double knot technique can fit into many shirts.



Windsor nodes are divided into “half windsor” and “full windsor”. At the bottom you will have a chance to look at the half windsor knot which is similar to the exact windsor knot but which is easier to make and thicker than the structure is more suitable for thin or light fabric ties.

Half windsor knots with a triangular shape and elegant appearance are generally preferred for open-necked or classic-necked shirts.



As the name implies, the knot of ties tied with a small knot technique becomes tiny. The small knotting technique preferred on tightly seated shirts or on ties with very thick fabrics should not be used on long-sleeved or seamed shirts.

Small knotted ties may not give a nice image in this type of catch. The small knot technique is also one of the easy ways to connect the necktie.



The full windsor knot is a type of tie binding known as the knot of special days. As a knot in England, the exact windsor knot that comes face to face comes from the Duke of Windsor.

Ties made with full windsor technique are generally preferred for dished collar products such as Italian collar, Windsor collar since they have a bulky structure. Although it seems a bit difficult to tie a cravat complete windsor knot with a tie, the tie must hide the last button on the shirt for a successful binding.



Ties made with Christensen technique usually have a thick knot structure. So it would be more logical for you to choose the ties you created with the Christensen knot on more discreet, long-sleeved shirts. Small-collared shirts will not carry ties made with the Christensen knotting technique.



The Grantchester technique is a tie-binding method that draws attention with its sleek and elegant appearance. In contrast to the simple knot and double knot methods of the tie knot, giving a flat image is one of the factors that makes Grantchester one step ahead of the tie tying technique.

When you successfully apply the steps in pictorial narration, you will be able to apply the ties to every shirt side by this technique. Of course, if your necktie fabric is very thin or too thick, you may need to choose a shirt with a wide-necked or small-necked shirt depending on the situation.



The “cafe knot”, a tie-binding technique, is a complex 11-step method. As you can see from the picture narration, you can draw attention to the invitations with the cafe knot which aims to give more than one kind of movement to the tie with a different image to the tie knot.

How to tie a Cravat with Classic Techniques

1- Quadruple Knot

Quadruple Knot

The Quadruple Knot is one of the oldest tie-binding techniques. It is said that the Quadruple Knot technique was found in the 18th century by the British phaetons in London by attaching their wagons to protect themselves from the cold.

The tie connected with the Quadruple Knot has a narrow and long knot. The Quadruple Knot technique is the fastest learned and simplest technique among tie tying techniques.

How to tie a Cravat with Quadruple Knot

  • Place your tie on the wide right side of your neck. It should be longer than the wide narrow end of your tie. Hold the wide end with your right hand and pass it over the narrow end to the left.
  • Move the wide narrow end back to the other side.
  • Take another round, circling the wide narrow tip.
  • Grab the wide end of your tie up from behind the knot, and then pull it down through the loop formed at the front.
  • Tighten your Quadruple Knot slightly.

2- City Knot

city knot

The Kent Knot is among the simplest tie-binding techniques. The Kent Knot, a small knot, is an ideal tie-binding technique for tall men. The necktie is about 5 cm longer than the necktie because it is used less than 1 or 2 turns.

How to tie a Cravat with City Knot?

  • Place your tie on the wide left side of your neck and turn it so that the inner side is visible.
  • Take the wide end of your tie through the narrow end of the tie and move to the other side.
  • Take the tie facing outward facing away from the outside so that the outside face looks outward.
  • Pull up the wide end of your tie from behind the knot, and then squeeze the knot slightly through the loop formed at the front.

3- Prince Albert’s Knot

Prince Albert's Knot

The difference between the Prince Albet Knot and the Quadruple Knot sets out a whirlwind tour. On this count, the ties that are connected with Prince Albert’s Knot have a fuller form. Prince Albert Knot is a great choice for fine ties made from silk fabric.

How to tie a Cravat with Prince Albert’s knot?

  • Place your neck as the widening of your tie will be longer. You will use this extra length to throw the second round.
  • Use your right hand to move around the narrow narrow end. Throw 2 rounds around the narrow end using this wide wedge.
  • If you want your tie to have a fuller knot you can accomplish this by taking the 3rd round.
  • Move up from the back of the enlarged knot and then squeeze the knot slightly through the loop formed at the front.

4- Half Windsor knot

Half Windsor knot

Windsor tie knots are known to have been invented by Duke of Windsor. The Half Windsor Node is thrown away using a small part of your tie like the same City Knot. The Half Windsor Node, which makes your tie look longer on this side, is especially preferred by tall men.

How to tie a Cravat with half Windsor knot?

  • Take the wide end of your tie which you place on the other side by passing it at a 90 degree angle from the top of the narrow end.
  • Pull up the narrow end of the tie without disturbing the wide end of your tie.
  • Spread over the wide narrow end and move it to the front, then move it to the left by moving it behind the knot that starts to form.
  • Move the wide end of your tie over the narrow end of the tie, take it back to the other side, and then pull it back up behind the knot that has formed.
  • Now squeeze the knot slightly by passing the broad end of your tie through the loop formed at the front.

5- Double Windsor

Double Windsor

Even though the Double Windsor Node is a very popular node, it is one of the most demanding nodes. If you want your tie to look bigger, Double Windsor Knot will be a great choice for you.

How to tie a Cravat with Double Windsor knot?

  • To throw a Double Windsor Knot you need to move around 2 times around the wide narrow tip. So do not neglect to leave the broader longer when you place your tie. Take the wide end of the necktie that you have placed on the other side by passing it at a 90 degree angle from the narrow end of the neck.
  • Pull up the narrow end of the tie without disturbing the wide end of your tie.
  • Spread over the wide narrow end and get to the front, then move it around the other side, moving behind the knot that starts to form.
  • Repeat the same move to the left to make a Double Windsor Node from the Half Windsor Node.
  • Slightly tighten the Windsor Knot, which has been completed.
  • Hold the knot you completed in the last round with your left hand and pass it through this knot wide.
  • Tighten Windsor Knot slightly.
How to Tie a Cravat: Tie Cravat, Instructions for Cravats
5 (100%) 3 votes

You might also like