How to Factory Reset Macbook

To resell or repair a Mac, you must reset it to the factory settings. Do not worry, the Tech Advisor tutorial is here to guide you. The article introduces you to methodologies that can help you reset MAC to its factory settings through a simple process.

How to Factory Reset Macbook

Before reselling or transferring your Mac, it is essential to delete your personal data.
Good news, erasing data on a Mac is not so complicated, but before the “we erase everything and we start again”, you will have to go through 7 steps.

Factory Reset Macbook

Follow our tutorial and your computer will find its youth of yesteryear!

1- Clone your Mac hard drive

Restoring a MacBook to factory settings will erase all your stored data.

Of course, you must first transfer all this data to another Mac, via a backup. Cloning your entire hard drive is the best option because it’s a perfect copy of your hard drive’s structure and content.

Carbon Copy Cloner and SuperDuper are ideal programs to clone your hard drive (both have a free trial version, the options are paid for).

To clone your drive, you will need an external hard drive and one of these programs. For this tutorial, we chose to use Carbon Copy Cloner (image above).

Launch the program then choose your hard drive says ” source”  and your external hard drive called ” destination” . Click Clone at the bottom right of the screen .

Now you should be able to boot your Mac from your cloned external drive.

To do this, restart your Mac by holding down the Option key (between the crtl and Cmd key) .

Using the arrow keys on your keyboard, select the external hard drive and press Enter .

This cloned hard drive can be cloned back to primary disk again, if your goal is to restore your Mac, or can be used to access all the original files on your computer, in case of cleaning your internal drive.

2- Remove access authorization to iTunes

Before you separate from your Mac, remove the permission to access your iTunes account.

This means your computer will no longer be associated with your iTunes account.

The method to use depends on the version of your iOS system.

If you’re using the most recent version, like this tutorial:

Go to iTunes, and then click Store → Permissions → Remove Access Permission from This Computer .
Enter your Apple ID and password and click Remove .

For previous versions (as below), go to the Store → Remove Access Permission option on this computer .

3- Disable FileVault

FileVault takes care of encrypting the files on your hard drive, no need to leave it on because you are cleaning your hard drive. To do this, follow the steps below:

  1. Open System Preferences and click Security and Privacy .
  2. Select the FileVault tab . 
  3. On the right side of the screen, you’ll see  Enable FileFault , if it’s grayed out, it’s not enabled.
    This is confirmed below “FileVault is disabled for” Macintosh HD “” disc.
  4. If you need to disable it, first click on the padlock in the lower left corner, enter your password to unlock it. Then, disable FileVault.

4- Disable iCloud

This is very simple:

  1. Open System Preferences.
  2. Select iCloud and click D disconnection.
  3. To delete all your personal data: click Remove from this Mac , for each a window that automatically appears on the screen.

5- Restart your Mac in safe mode

First of all, make sure you are connected to the internet, this is necessary for the installation of macOS. Then follow the steps below:

  1. Click on the Apple icon .
  2.  Keep pressing Command [cmd ] and R , until the window Disk Utility in Safe Mode  appears.

6- Erase your Mac hard drive

Before following this mini-tutorial, it is advisable to have cloned the hard drive beforehand (see above). Once done, do the following:

  1. Select the Disk Utility and click Continue.
  2. Now choose your main disk (normally named Macintosh HD), then click Dismount.
  3. Select the Erase tab and click Erase to empty your entire hard drive.
  4. Quit the utility. Select Disk Utility → Exit Disk Utility.

7- reinstall macOS

Final stretch before the rebirth of your Mac!
Follow these two small steps:

  1. Click Reinstall under Mac OS Utilities , and then click Continue . Follow the instructions on your screen. This will allow you to load and install a blank copy of macOS without data on your Mac.
  2. If you plan to give up your computer, do not enter your Apple ID or password during this step.
    The new owner will complete the installation.

How to Reset MAC to factory settings

Summary: For many users working on complicated software, manipulating the parameters of their MAC can become tedious. At times when your Mac starts having problems while using an application and it gets slower until you can not stand it anymore. You may be looking for how to reset the Mac to the factory settings. In this article, we will explain how to reset Mac to factory settings .

Part 1 Why reset MAC to factory settings

The main reason for Resetting the Mac to factory settings is that after a long period of use, the MAC keeps too many unwanted files and software accumulated. Although some files are used consistently, most of them are rarely or never used. the space occupied by these files makes the system messy and slow and causes, so we try to restore our mac to make it to the original state.

The following situations often occur when you want to reinstall mac:

  1. The data, software, applications and files that have been stored on your Mac are eventually to be deleted after mac recovery.
  2. Changes made to the settings will be canceled.
  3. Applications that are not reinstalled on the Mac will disappear after mac reboot
  4. The OS X you worked with will be deleted and replaced with a new copy of the same software.

Users, after having reset their MAC to its factory settings, are free to install the software they want. However, it is imperative to back up data before proceeding to restore mac to its factory settings.

Part 2 How to back up data before resetting the MAC to its factory settings

To avoid possible data loss, creating a backup of your valuable data is necessary before proceeding to restore your MAC to its factory settings. The steps are as follows:

Step 1. First, make sure you have an external hard drive with sufficient storage capacity. Ideally, choose an external hard drive with storage twice the size of your MAC.

Step 2. The external hard drive must be connected to the MAC. This is usually done via a USB cable, Firewire or eSATA.

Step 3. It is important to format your external hard drive as this would ensure that the files are correctly placed for a MAC in case of data recovery.

Step 4. The next step is to launch the Time Machine application on Mac. it is an application preinstalled on MAC OS X. For those who can not find it, it is accessible via Finder – >> Applications – >> Time Machine .

Step 5. Please designate your external hard drive as a backup disk for your MAC data when there is a prompt in a dialog box.

Step 6. You must then activate the Time Machine. The Backup utility automatically starts backing up your MAC. You will need to allocate, perhaps, one night for the backup to take place. This usually depends on the amount of data you carry in your MAC.

Step 7. You can also schedule frequent backups with the Time Machine. Typically, the Time Machine would save your data every hour, unless you have made other customizations. Time Machine allows you to create incremental backups of the current state of the data stored on your MAC, allowing the user to go back in time and recover any missing file or data.

Part 3 Guide to restore the MAC to its factory settings

Once the data backup of your Mac is complete, you are about to reset your MAC to its factory settings. The steps are as follows:

Step 1. Turn on your MAC.

Step 2. When you hear the startup sound, hold down the Command and R keys on your keyboard.

Step 3. Once the Apple logo appears on your screen, you can release the keys.

Step 4. Next You can either connect your MAC to the Internet using an Ethernet cable or, when prompted, select the specific Wi-Fi network.

Step 5. Once the recovery menu appears on your screen, you can choose to install OS X.

Step 6. You must now follow the on-screen instructions and select your destination disk and complete the installation for OS X.

With these steps, you can reinstall the latest version of OS X that you previously used on your MAC. For those looking to restore Mac to the factory settings using the same version of OS X, they must retain Command-Option-R at startup, as this starts the MAC from Internet Recovery.

Part 4 How to recover lost data after resetting Mac to factory settings

Now the next problem we all face is recovering our data after restoring our MAC systems. You can certainly use Time Machine to perform this data recovery, whereas if you have not created the backup before you reset the Mac, we recommend a Wondershare Recoverit Professional Data Recovery Program for Mac specifically designed for Mac MAC users.

Here are the steps to help you recover your lost data on Mac:

Step 1. Launch Wondershare Recoverit on Mac

When you launch Wondershare Recoverit for Mac on your Mac, the recommended section “Universal Recovery” will come out first, you simply click the icon at the top right to return to the Home page.

When you are on the main interface, select the “Recycle Bin” mode .

Step 2. Scan deleted files after Mac system restore

Wondershare Recoverit will quickly scan all the files you lost after resetting your Mac.

Step 3. Check and recover all lost files

After the scan, all the releasable files are displayed in the scan result. You can preview and check the files in the trash folder one by one to make sure the files you want to recover are there. Then select the searched files and click 1 for “Recover”.

How to Factory Reset Macbook
5 (100%) 1 vote